Hot-box release agents can be used in coated-sand casting, while cold-box release agents can be used in self-setting furan resin sand casting, facilitating demolding and improving casting efficiency.

Product overview: foundry release agent is a milky-white suspension with mold-cleaning and release functions. Heat-curing and cold-setting binders are widely used in casting. Once molds or cores harden, release agent is brushed onto mold surfaces to reduce stripping friction and protect mold and core quality. It is suitable for self-setting sand, sodium silicate sand, oil sand and other sand systems, and can be applied to wooden, resin and metal patterns and various core boxes.

Functions and Properties:

1. A milky-white liquid blended from special materials and surfactants.

2. Non-toxic, odorless and non-corrosive, with good water-dilution stability.

3. Excellent cleaning, cooling and lubrication performance, combining mold cleaning and release with effective cleaning and repeated release cycles.

4. Nonionic, pH 6.5–7.2. Can be diluted without separation; centrifugal stability (1500 rpm / 10 min) < 0.1 ml.

5. Suitable for mold cleaning and release during die casting or casting of aluminum, zinc, magnesium, their alloys and other metals.

6. Stir thoroughly before use, then dilute with 80–100 times its volume of water according to actual requirements and practice. Stir and apply directly with a spray gun.

7. This product is classified as non-dangerous. During transport and storage, prevent contamination by acids, alkalis and other impurities, and protect it from sunlight and rain.

Directions: shake well before use and spray or brush onto the pattern surface. Apply 2–3 coats initially. Each subsequent coat can support 5–15 releases, depending on the type and complexity of the pattern.

Precautions:

1. This product is volatile. Close or seal the container securely after use.

2. If sediment appears (very unlikely), shake thoroughly before use.

3. Store in a cool place away from sources of ignition.