Tips for Using Lower-Mold Release Agents 
Aoda Chemical specializes in producing, wholesaling and developing mid-range and high-grade lower-mold release agents, with free samples available.  I. Technical Parameters:  1. Appearance: homogeneous milky-white to pale-yellow liquid;  2. Solids content: 15±2%;  3. pH: 6.5–7.5;  II. Performance Features: 
1. Fast curing; a convenient water-based product that is safe and environmentally friendly.  2. Low residue without contaminating molds. 
3. Does not affect secondary processing such as painting, printing or lamination.  4. High surface gloss on finished products.  III. Applications:  Suitable for polyurethane shoe soles and PU outsole materials.  IV. Directions for Use: 
1. Clean the mold before use to prevent residual release agent from affecting the curing of this product on the mold. 
2. Using a compressed-air spray gun, spray the diluted release agent (diluted with 1–25 times its volume of water) onto the mold cavity from a suitable distance. Dry with an air gun or wipe dry with a cloth. 
V. Storage: 
Store sealed, protected from light, at 10–25°C for up to one year.